Understanding TDS Levels in Drinking Water: What Is the Ideal Range for Safe Consumption?

TDS Levels in Drinking Water

Introduction

When you drink water every day, have you also wondered what the TDS levels are in your drinking water? Checking the TDS of your drinking water is one of the most important steps in making sure you’re drinking safe and healthy water. TDS, or Total Dissolved Solids, is the total amount of dissolved solids including minerals and salts present in the water. This is one of the most important factors used to decide which type of purifier is suitable for your water. 

TDS tells you how much is dissolved in water, not what is dissolved, which is where the problem lies. 

This guide will help you understand TDS levels in drinking water and the ideal range for consumption. 

What is TDS in drinking water? 

What is TDS in drinking water? TDS is the total amount of dissolved substances in your water. This can be minerals like calcium, magnesium, sodium, potassium, among others. It is measured in parts per million (ppm) or milligrams per litre (mg/L). TDS levels in drinking water do not determine what exactly is present in the water. 

TDS in water is often natural. As water travels through rocks and soil, it picks up minerals and substances along the way. Pollution contributes as well, which is why two water samples with the same reading can differ in quality. 

What do BIS and WHO say about TDS levels?

When we look at TDS levels in drinking water, two standards matter the most. What do BIS and WHO have to say about this? 

BIS (IS 10500): The Bureau of Indian Standards sets 500 mg/L as the acceptable limit. BIS says that if TDS in water is above 500 mg/L, water may taste harsh and less pleasant, and may cause irritation. 

WHO: The World Health Organization rates TDS by taste, as shown below. 

TDS (mg/L)Taste rating 
Below 300 Excellent 
300 – 600 Good
600 – 900 Fair
900 – 1,200 Poor
Above 1,200 Unacceptable

TDS in water is a marker of taste and water quality. It is not a direct measure of toxicity. 

What is the ideal TDS range for safe consumption? 

There is a difference between what is ideal and what is acceptable, and it is often a thin line. In this day and age, where pollution is omnipresent across the ecosystem, it is hard to find natural water with an ideal TDS range. Most drinking water sources warrant the intervention of a purifier. 

DrinkPrime considers a TDS of 0 to 200 ppm acceptable. Here is a simple way to read your number:

  • 0 to 200 ppm: Acceptable for daily drinking, as per DrinkPrime. Water in this range is light on minerals and gentle on the taste. 
  • 200 to 300 ppm: Still well within WHO’s “excellent” taste band (below 300 mg/L).
  • 300 to 500 ppm: Acceptable as per BIS, though taste varies from person to person.
  • Above 500 ppm: Best treated before drinking. 

If TDS is too high, especially above 500 ppm, water can start tasting harsh and a little salty, and scale may build up on kettles, pipes, etc.” 

How to check and fix your TDS

Checking your TDS is not a complex process at all. It often takes less than a minute. It is measured using a small handheld TDS meter. All you need to do is:

  1. Fill a clean glass with water.
  2. Switch on the meter and dip it in, without touching the bottom.
  3. Wait a few seconds for the reading to settle.

One quick tip is to test both your tap water and your purified water. This way you can find out whether your purifier is actually doing its job 

One of the best ways to fix high TDS water is treating it with RO. RO purification lowers your TDS significantly. RO uses high pressure and a membrane to separate the water from dissolved solids. If you’re worried about RO removing the essential minerals that water contains, many purifiers add them back to the treated water using a mineraliser cartridge. 

Not ready to buy? Rent a purifier that handles TDS for you

If your water has high TDS and you would rather not make an upfront investment in a purifier, you can always rent one. Bengaluru-based DrinkPrime offers a range of water purifiers designed to purify your city’s water. The five product variants are DrinkPrime Copper (rental plans start from ₹349/month), DrinkPrime Alkaline (₹417/month), DrinkPrime Mineral+ (₹399/month), DrinkPrime Under-The-Sink (₹629/month) and DrinkPrime UV (₹299/month). 

DrinkPrime’s plans do not involve a huge upfront cost. There is only a refundable security deposit of ₹1,500 (only for the Under-The-Sink variant, the security deposit is ₹1,999). The rental plans for all the purifiers cover the product, delivery and installation, maintenance (repairs, filter replacements), and relocation (if you move). 

DrinkPrime is currently available in Bengaluru, Delhi NCR, Hyderabad, Mumbai, Pune, Chennai and Kolkata. 

For purifiers in Chennai and Kolkata, DrinkPrime has additional filters that are customised for the cities’ hard water. Chennai’s purifiers have an anti-scalant filter, which removes scale and helps the membranes last longer. Kolkata’s purifiers have the anti-scalant filter plus an iron removal filter, since Kolkata’s water has excess iron. 

DrinkPrime tackles two problems head-on: high cost and unsafe water. That is why its purifiers are affordable and deliver pure, safe drinking water. 

Conclusion  

Understanding TDS levels in drinking water is the first step. Check your TDS regularly using a TDS meter, and make sure you get the right water purifier depending on your TDS levels. DrinkPrime’s affordable purifiers on rent can help you in this regard. 

Frequently asked questions

1. What is TDS in drinking water?

TDS stands for Total Dissolved Solids, the minerals and salts dissolved in your water. It is measured in mg/L or ppm, and it shapes the water’s taste, scaling and overall water quality.

2. What are safe TDS levels in drinking water?

BIS accepts up to 500 mg/L, and up to 2,000 mg/L only when no better source exists. For everyday drinking, DrinkPrime considers 0 to 200 ppm acceptable.

3. Is 500 ppm TDS in water safe to drink?

It is the BIS acceptable limit, but taste varies and some people may feel stomach irritation above it. Get a lab test if you are unsure.

4. Does TDS water quality tell me if my water is safe?

Not fully. TDS shows how much is dissolved, not what is dissolved. Harmless minerals and harmful contaminants like arsenic or nitrate can give the same reading.

5. How often should I check my TDS?

A monthly check with a TDS meter is a good habit. Test again after a purifier service or whenever the taste of your water changes.